• 4260285296673
  • 4260285296673_big

    Project S Midi - Black

    With the Project S Midi we present a stylish case for compact HPTC systems.

    The elegant case offers ample space for Micro-ATX motherboards and standard ATX power supplies. One 3.5 inch HDD, as well as two 2.5 SSD can be mounted inside the classic HTPC case. The hard disk is installed at the left side of the drawer.

    The Project S Midi offers a variety of different features. This includes fully modular SSD holders where you can connect the cable from underneath the motherboard tray, magnetic dust filters at every air intake opening and a top cover made from 5 mm thick, scratch resistant tempered glass. Not only that, you can also opt to use it in an upright position as a small tower case.

    The absolute highlight of the Project S Midi is certainly the sophisticated drawer design. The drawer can be easily pulled out for installation or maintenance of the system – even if the hardware is fully installed, and during operation. The top is made out of tempered glass, which still allows an unobstructed view on the installed hardware. Since the tempered glass is scratch-resistant, a monitor can be placed on the top, if desired.

    The I/O shield is located at the right side of the case, with 2 x USB 3.0 and a USB 3.1 Type C connector, as well as HD audio connectors. Next to it you can find power- reset-, and the LED-button. The noble and intentionally simple front design is highlighted again by an RGB LED strip, which decorates the lower part of the front. The different colors can be chosen by simply clicking the LED-button. If you do not want to use the RGB-LED, you can simply switch it off.

    The ventilation system of the Project S Midi offers space for five case fans. One 120 mm fan can be installed behind the front cover, two more at the right side of the drawer. In addition to that you can mount two 60 mm fans at the rear of the case, in order to improve air circulation. Magnetic dust filters at all case openings ensure that no dust will be sucked into the case.

    Users who would like to install a water cooling in their system can mount a 120 mm cooling solution or a radiator behind the front cover. Please be advised that it might be possible to forego the installation of a HDD and one of the SSD, depending on the radiator you choose.

    Graphic cards with a length of up to 300 mm and space for CPU coolers with a maximum height of 110 mm can be accommodated in the Project S. Should you opt to remove one of the SSD holders, you can even install VGA cards of up to 330 mm in length.

    TECHNICAL DATA
    Model: Project S Midi - Black
    EAN: 4260285296673
    Manufacturer Number: NXPSMDB
    Order Number: 600066535
    Case Type: HTPC
    Form Factor: Micro-ATX, Mini-ITX
    2.5 inch drive bay internal: 2
    3.5 inch drive bay internal: 1
    Case Fan (Front): opt. 1 x 120 mm
    Case Fan (Rear): opt. 2 x 60 mm
    Case Fan (Right side): opt. 2 x 120 mm
    Height (Approx.): 163 mm
    Width (Approx.): 415 mm
    Depth (Approx.): 380 mm
    Material: Steel, aluminium, tempered glass
    Weight (Approx.): 8,5 kg
    Maximum installation height of CPU coolers: 110 mm
    Maximum VGA Card Length: 300 (330) mm