With the Project S Midi we present a stylish case for compact HPTC systems.
The elegant case offers ample space for Micro-ATX motherboards and standard ATX power supplies. One 3.5 inch HDD, as well as two 2.5 SSD can be mounted inside the classic HTPC case. The hard disk is installed at the left side of the drawer.
The Project S Midi offers a variety of different features. This includes fully modular SSD holders where you can connect the cable from underneath the motherboard tray, magnetic dust filters at every air intake opening and a top cover made from 5 mm thick, scratch resistant tempered glass. Not only that, you can also opt to use it in an upright position as a small tower case.
The absolute highlight of the Project S Midi is certainly the sophisticated drawer design. The drawer can be easily pulled out for installation or maintenance of the system – even if the hardware is fully installed, and during operation. The top is made out of tempered glass, which still allows an unobstructed view on the installed hardware. Since the tempered glass is scratch-resistant, a monitor can be placed on the top, if desired.
The I/O shield is located at the right side of the case, with 2 x USB 3.0 and a USB 3.1 Type C connector, as well as HD audio connectors. Next to it you can find power- reset-, and the LED-button. The noble and intentionally simple front design is highlighted again by an RGB LED strip, which decorates the lower part of the front. The different colors can be chosen by simply clicking the LED-button. If you do not want to use the RGB-LED, you can simply switch it off.
The ventilation system of the Project S Midi offers space for five case fans. One 120 mm fan can be installed behind the front cover, two more at the right side of the drawer. In addition to that you can mount two 60 mm fans at the rear of the case, in order to improve air circulation. Magnetic dust filters at all case openings ensure that no dust will be sucked into the case.
Users who would like to install a water cooling in their system can mount a 120 mm cooling solution or a radiator behind the front cover. Please be advised that it might be possible to forego the installation of a HDD and one of the SSD, depending on the radiator you choose.
Graphic cards with a length of up to 300 mm and CPU coolers with a maximum height of 110 mm can be accommodated in the Project S. Please keep in mind that due to the low profile design of the Project S Midi, VGA card cards should not be more than 120 mm high to avoid compatibility issues (incl. power cables). Should you opt to remove one of the SSD holders, you can even install VGA cards of up to 330 mm in length.
|Model: Project S Midi - Black|
|Manufacturer Number: NXPSMDB|
|Order Number: 600066535|
|Case Type: HTPC|
|Form Factor: Micro-ATX, Mini-ITX|
|2.5 inch drive bay internal: 2|
|3.5 inch drive bay internal: 1|
|Case Fan (Front): opt. 1 x 120 mm|
|Case Fan (Rear): opt. 2 x 60 mm|
|Case Fan (Right side): opt. 2 x 120 mm|
|Height (Approx.): 163 mm|
|Width (Approx.): 415 mm|
|Depth (Approx.): 380 mm|
|Material: Steel, aluminium, tempered glass|
|Weight (Approx.): 8,5 kg|
|Maximum installation height of CPU coolers: 110 mm|
|Maximum installation height of VGA cards: 120 mm (incl. power cable)|
|Maximum VGA Card Length: 300 (330) mm|